Skip to content
Fieldstone Water Co.

Nassau County · Public water (Port Washington Water District)

Water Quality in Flower Hill, NY — What’s In Your Water

Flower Hill's water is supplied by Port Washington Water District. The most recent published results show Barium at 0.037 mg/L, Bromide at 0.053 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.

Reported contaminants

Flower Hill water, by the numbers

Data from Port Washington Water District 2025 Water Quality Report · Verified 2026-11-11

ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.

Contaminants reported in Flower Hill, Nassau County drinking water, with detected level, regulatory limit, and status.
SubstanceDetected levelLimitStatusSource
PFAS
PFOA (about this substance)8.03 ng/LRange ND–8.0310NYS MCLNear limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFOS (about this substance)2.7 ng/LRange ND–2.710NYS MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFBA (about this substance)5.01 ng/LRange ND–5.01No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFHpA (about this substance)2.0 ng/LRange ND–2.0No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFHxS (about this substance)2.68 ng/LRange ND–2.68No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFHxA (about this substance)3.44 ng/LRange ND–3.44No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFPeA (about this substance)5.96 ng/LRange ND–5.96No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
PFNA (about this substance)ND–4.2 ng/Lrange; no average publishedNo regulatory limit—EPA UCMR 5 PFAS results, 2023–2025 (entry-point samples) (opens in a new tab)
PFBS (about this substance)ND–ND ng/Lrange; no average publishedNo regulatory limitNot detectedEPA UCMR 5 PFAS results, 2023–2025 (entry-point samples) (opens in a new tab)
HFPO-DA (about this substance)ND–ND ng/Lrange; no average publishedNo regulatory limitNot detectedEPA UCMR 5 PFAS results, 2023–2025 (entry-point samples) (opens in a new tab)
Industrial solvents & 1,4-dioxane
1,4-Dioxane (about this substance)0.35 µg/LRange ND–0.351NYS MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Nitrate, metals & inorganics
Chlorate (about this substance)145 mg/LRange 23.1–145250EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Nitrate (about this substance)5.8 mg/LRange 3.4–5.810EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Nitrate-Nitrite (as N) (about this substance)5.8 mg/LRange 3.4–5.810EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Combined Radium 226/228 (about this substance)2.33 pCi/LRange 0–2.335EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Chloride (about this substance)106 mg/LRange 71.5–106250NYS secondary standardBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Sulfate (about this substance)84.9 mg/LRange 10.9–84.9250NYS secondary standardBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Gross alpha (about this substance)4.21 pCi/LRange 0–4.2115EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
1,1-Dichloroethane (about this substance)0.96 µg/LRange ND–0.965EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Gross beta (about this substance)4.62 pCi/LRange 0–4.6250EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Uranium (about this substance)2.105 µg/LRange 0–2.10530EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Perchlorate (about this substance)1.1 µg/LRange ND–1.118NYS MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Selenium (about this substance)2.9 µg/LRange ND–2.950EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Barium (about this substance)0.037 mg/LRange 0.011–0.0372EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Copper (about this substance)0.02 mg/LRange ND–0.021.3EPA action levelBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Zinc (about this substance)0.026 mg/LRange ND–0.0265NYS secondary standardBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Bromide (about this substance)0.053 mg/LRange 0.053–0.053No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Calcium (about this substance)39.3 mg/LRange 21.1–39.3No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Magnesium (about this substance)18.2 mg/LRange 11.3–18.2No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Nickel (about this substance)0.0012 mg/LRange 0.00091–0.0012No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Sodium (about this substance)39 mg/LRange 22–39No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Corrosivity (LSI) (about this substance)-0.65 Range -3.71–-0.65No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Alkalinity (about this substance)84.0 mg/LRange 31.2–84.0No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Total Dissolved Solids (about this substance)297 mg/LRange 58–297No regulatory limit—Port Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Lead & copper
Lead (about this substance)3.6 µg/L(90th percentile)Range ND–17.615EPA action levelBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Copper (about this substance)0.15 mg/L(90th percentile)Range 0.013–0.331.3EPA action levelBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Disinfection byproducts
Formaldehyde (about this substance)34.6 µg/LRange ND–34.680EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Glyoxal (about this substance)14.3 µg/LRange ND–14.380EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Propanal (about this substance)9.3 µg/LRange ND–9.380EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Total Trihalomethanes (about this substance)3.8 µg/LRange ND–3.880EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Chloroform (about this substance)1.5 µg/LRange ND–1.580EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Bromoform (about this substance)1.2 µg/LRange ND–1.280EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)
Dibromochloromethane (about this substance)1.2 µg/LRange ND–1.280EPA MCLBelow limitPort Washington Water District 2025 Annual Water Quality Report (opens in a new tab)

Water characteristics

Where the report prints only a range, status reflects the high end of that range; where it prints an average, status reflects the average.

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. 100% of Flower Hill's land lies inside a public water service area (Port Washington Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

Your water district

Who supplies Flower Hill’s water

EPA compliance

Federal violation record for Flower Hill’s suppliers

The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.

Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.

What the numbers mean

Like most of Nassau, Flower Hill runs on treated public water. The day-to-day concerns here are the chlorine and chloramine used to keep the supply safe through the distribution system, plus the naturally high hardness of Long Island groundwater — the mineral content that leaves scale on fixtures and spots on glassware. Neither is an emergency, but both are exactly what point-of-entry carbon filtration and softening are designed to address.

What this means for filtration

Matching Flower Hill’s water to a system

For Flower Hill, the numbers point first to under-sink reverse osmosis, whole-house carbon filtration, and whole-house + softener combo: dissolved contaminants close to their limits.

  • Recommended

    Under-Sink Reverse Osmosis

    Dissolved contaminants close to their limits

    Nitrate averaged 5.8 mg/L with samples up to 5.8 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. PFOA/PFOS reached 8.03 ng/L (ppt) in at least one sample — under New York's 10 ppt limit but at or above the 4.0 ppt federal MCL, with federal compliance due April 26, 2029. Whether an under-sink reverse osmosis model reduces PFOA or PFOS depends on that model's certification or performance data sheet. Sodium averaged 39 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets. Perchlorate was detected up to 1.1 µg/L (limit 18). The supplier's 90th-percentile lead result was 0.0036 mg/L (4 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.

    Explore Under-Sink Reverse Osmosis
  • Recommended

    Whole-House Carbon Filtration

    Chlorine residual 0.86 mg/L

    Free chlorine averaged 0.86 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 1.5 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.

    Explore Whole-House Carbon Filtration
  • Recommended

    Whole-House + Softener Combo

    Hardness 173 mg/L, about 10.1 grains per gallon

    At 173 mg/L (10.1 gpg) this is hard water: it scales water heaters, spots glassware and leaves film on skin. A softener paired with carbon is the standard fix above 7 grains.

    Explore Whole-House + Softener Combo

Questions

Flower Hill water FAQ

Free in-home test

See what’s really in your Flower Hill water.

Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.