Skip to content
Fieldstone Water Co.

Methodology

Where every number on this site comes from

No water quality figure here is estimated or modeled. Each one is copied from a public record, shown against its regulatory limit, and linked to the document it came from. Last data update: 2026-11-11.

Coverage

292 communities, three levels of evidence

285 communities: full contaminant table
Every substance the supplier reported in its annual water quality report, with average, range, sample count and limit. 22 of these take their SCWA distribution area from the mapped communities they border and say so on the page.
3 communities: supplier, EPA compliance record, lead result
The public system(s) EPA maps to the community’s ZIP codes, that system’s violation record, and the 90th-percentile lead result. The full table from the supplier’s own report is being added district by district.
4 communities: private wells
No public water system is mapped to them, so no public report exists.

Sources

The public records behind the tables

  1. Suffolk County Water Authority, 2026 Drinking Water Quality Report (2025 data)

    Every printed row for all 30 SCWA distribution areas (about 108 substances each, including everything tested for and not detected, pharmaceuticals and personal care products, radiological results, and SCWA's per-system lead and copper tap results), transcribed from the report’s data pages by five independent passes and re-audited row by row against 300-DPI renders of every page. Values are ranges and averages across every well feeding an area at the entry point. Source document. Extracted 2026-09-14. One correction is recorded in the source file: the chlorine limit on three areas’ rows, garbled by a PDF row wrap, was restored to the 4 mg/L MRDL.

  2. 42 supplier Annual Water Quality Reports (2025 data)

    Every Nassau County district, village and utility report we could obtain from the supplier’s own website (or the town or village site that hosts it), plus the Suffolk districts outside SCWA, transcribed row by row with the printed footnotes. Each community page links the exact PDF. Where a report’s printed unit is a plain typesetting slip (a metal at 0.05 “µg/L” against a 300 µg/L limit), the row says so; where a printed value is contradicted by the report itself, it is shown but not counted as above the limit, with the reason.

  3. Smithtown Water District, 2025 Drinking Water Quality Report (Spring 2026 edition, calendar-year 2025 data)

    Source document. Publishes ranges rather than averages; status reflects the highest reading.

  4. EPA Safe Drinking Water Information System (SDWIS)

    System details, every violation with its compliance-period date, and lead/copper 90th-percentile results for 64 community water systems whose EPA record lists Nassau or Suffolk County, pulled directly from EPA Envirofacts on 2026-11-11. Refreshed monthly.

  5. EPA UCMR 5 PFAS results (2023–2025)

    Every PFAS and lithium sample EPA collected under the Fifth Unregulated Contaminant Monitoring Rule for Long Island systems serving more than 3,300 people: 41 systems, with the ZIP codes each reported serving. Samples are taken at each entry point to the distribution system, so a result describes water leaving one well field, not blended tap water. Source, extracted 2026-11-11.

  6. EPA Community Water System Service Area Boundaries

    Service-area polygons for every Long Island community water system, published by EPA; the large systems’ polygons are supplied by the New York State Department of Health and the small systems’ are EPA-modeled. We intersect them with Census community boundaries to measure what share of each community’s land is inside a public water service area. That share, not a judgment, decides whether a community is shown as public water (90% or more), private wells (10% or less) or mixed, and it names the supplier for communities no report lists. Computed 2026-09-26; script in scripts/geo/water-coverage.py.

  7. US Census Bureau boundaries

    Towns, cities, villages and hamlets (TIGER/Line 2025 county subdivisions and places) clipped to the Cartographic Boundary county outlines. Public domain.

  8. Regulatory limits

    New York State Sanitary Code Subpart 5-1 (including the 2020 PFOA, PFOS and 1,4-dioxane limits) and EPA National Primary and Secondary Drinking Water Regulations, including the 2024 PFAS rule effective 2029.

Rules we follow

How a number gets onto a page

  • Every transcribed table was checked twice: once when it was copied from the report, and again on September 26, 2026 by an independent second pass that compared every row, field by field, against the PDF (1,400 district rows and all 30 SCWA areas). The second pass found no value errors; it corrected footnote spacing on three rows, one unit label, and added rows the first pass had skipped. Each source file records its audit.
  • Every value is shown with its unit, its limit, the limit’s authority (NY or EPA), and a link to the source document.
  • “Above limit” is a numeric comparison of the reported average (or range high where no average is published) to the limit. It is not a finding of regulatory violation; the supplier’s own violation flag is carried separately.
  • A single sample above the limit is flagged as a peak even when the average is under it.
  • Nothing is interpolated. Where a community’s supplier table has not been extracted yet, the page says so and shows what is on record.
  • Supplier reports describe water leaving the plant or distribution area, not any one tap. Private wells are outside every public report.

Open data

Use the data

Every figure on these pages is available as JSON and markdown, free to use with attribution to Fieldstone Water Co. and a link to the town page. Underlying government records are public domain; supplier reports remain their publishers’.

  • https://www.fieldstonewater.com/api/v1/townsevery community with status and links
  • https://www.fieldstonewater.com/api/v1/towns/{slug}one community: suppliers, contaminants, EPA record
  • https://www.fieldstonewater.com/api/v1/contaminantsevery tracked substance with island-wide counts
  • https://www.fieldstonewater.com/api/v1/contaminants/{slug}one substance across every community
  • https://www.fieldstonewater.com/api/v1/openapi.jsonAPI description
  • https://www.fieldstonewater.com/water/{slug}.mdany community page as markdown
  • https://www.fieldstonewater.com/llms.txtindex for AI assistants

144 substances tracked. Corrections: if you find a figure that does not match its source document, tell us and we will fix it and note the correction here.