Skip to content
Fieldstone Water Co.

Water sources · Public water

Public Water on Long Island: Districts, SCWA, and What You Get

A public water system pumps groundwater from its own wells, treats it, tests it on a state schedule, and delivers it through mains to the street. In Nassau that means more than forty separate districts, villages and utilities; in Suffolk the Suffolk County Water Authority serves most of the county alongside a dozen or so smaller districts. Every one of them must publish an annual water quality report, and those reports are the basis of every community page on this site.

At a glance

Pros and cons

Advantages

  • Tested on a state-mandated schedule by certified labs, with results public every year.
  • Treated for the island's known problems: disinfection, and PFAS or 1,4-dioxane removal where wells need it.
  • Enforced limits with county health department oversight and public notice when something is exceeded.
  • Reliable pressure and volume; fire hydrants on the street.
  • No pump, pressure tank or well maintenance for the homeowner.

Trade-offs

  • Chlorine or chloramine taste and odor, and disinfection by-products, are part of the package.
  • Hardness is usually passed through untreated.
  • Results are system averages; your tap may differ from the published figure.
  • The report stops at the curb; lead and copper from your own plumbing are not its job.
  • Unregulated substances are monitored but not limited.
  • You cannot choose your supplier or how it treats.

Who runs the water

Nassau County's supply is unusually fragmented. Town water districts (Hempstead, Oyster Bay and North Hempstead each run several), incorporated villages with their own departments, public authorities such as the Water Authority of Great Neck North, and an investor-owned utility, Liberty Utilities, each operate their own wells, treatment and mains. Neighbouring streets can be on different systems with different results.

Suffolk County is the opposite. The Suffolk County Water Authority, a public-benefit corporation, serves roughly 1.2 million people across most of the county from hundreds of wells grouped into distribution areas. A handful of independent districts and villages (Riverhead, Greenport, Dix Hills, South Huntington, Smithtown's districts, and others) serve the rest of the piped population.

Every system is regulated by the New York State Department of Health through the county health department, which sets the sampling schedule, reviews results and enforces the limits.

What treatment usually means here

Because the source is groundwater, treatment is lighter than in a surface-water city. Nearly every Long Island system adds chlorine, and some add chloramine, to keep the water disinfected through the mains. Many adjust pH or add a corrosion inhibitor to protect pipes. Where a well shows iron or manganese, it may be filtered or blended with cleaner wells.

The newer additions are contaminant-specific. Granular activated carbon vessels remove PFAS at affected wells, and advanced oxidation plants, a Long Island specialty, break down 1,4-dioxane, which carbon cannot hold. Not every well has these; the annual report says which do.

Hardness is generally not treated at the plant. If your community's report shows high hardness, that is what arrives at the house.

What the annual report can and cannot tell you

The report lists every regulated substance detected, usually as a range across all the system's wells plus an average or maximum. It is honest and audited, but it describes the system, not your street. In a system that blends many wells, the water at your tap can come from one well on one day and another the next.

It also stops at the curb. Lead and copper are sampled at a set of customer taps, but the pipes inside your house, the fixtures and the water heater are yours. The report cannot see them.

What to do

If this is your water

  1. 1.Read your community's page

    Every substance your supplier reported, shown against its limit, with the report linked. Rows marked near or above a limit are where to pay attention.

  2. 2.Check the supplier's EPA record

    The supplier pages list every violation EPA has on file for the system, health-based or paperwork, over the last decade.

  3. 3.Test at the tap for what the report cannot see

    Chlorine level, hardness and lead or copper from house plumbing are tap-level questions. A free in-home test answers them in your kitchen.

  4. 4.Decide on treatment by what you found

    On public water the common equipment types are whole-house carbon filtration, a water softener for hardness, and under-sink reverse osmosis. What a model reduces is on that model's data sheet. This site makes no claim that any home system removes 1,4-dioxane.

On this site

Communities on public water

205 communities are shown as public water, measured from the service-area boundaries the state supplies to EPA; another 72 are mixed, with mains on some streets and wells on others. See them ranked on the rankings page or by county: Nassau and Suffolk.

Questions

Common questions

Sources

Start here

Find out what reaches your tap.

A free in-home test measures what is actually in your water, whatever its source, and tells you whether treatment is worth it and when a certified laboratory test is the right next step.