Skip to content
Fieldstone Water Co.

Nassau County · Public water (Bethpage Water District)

Water Quality in Plainedge, NY — What’s In Your Water

Plainedge's water is supplied by Bethpage Water District. The most recent published results show Copper at 0.035 mg/L, Chloride at 20.9 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.

Reported contaminants

Plainedge water, by the numbers

Data from Bethpage Water District 2025 Water Quality Report · Verified 2026-11-11

ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.

Source: Bethpage Water District 2025 Annual Water Quality Report (opens in a new tab)

Contaminants reported in Plainedge, Nassau County drinking water, with detected level, regulatory limit, and status.
SubstanceDetected levelLimitStatus
PFAS
PFBA (about this substance)2.55 ng/LRange ND–2.55No regulatory limit—
PFPeA (about this substance)2.95 ng/LRange ND–2.95No regulatory limit—
Nitrate, metals & inorganics
Nitrate (about this substance)6.6 mg/LRange ND–6.610EPA MCLBelow limit
Nitrate-Nitrite (as N) (about this substance)6.6 mg/LRange ND–6.610EPA MCLBelow limit
1,1-Dichloroethane (about this substance)3.1 µg/LRange ND–3.15EPA MCLBelow limit
Perchlorate (about this substance)8.8 µg/LRange ND–8.818EPA action levelBelow limit
Combined Radium 226/228 (about this substance)2.295 pCi/LRange 0.548–2.2955EPA MCLBelow limit
Chloride (about this substance)20.9 mg/LRange 8.7–20.9250NYS secondary standardBelow limit
Gross alpha (about this substance)0.899 pCi/LRange ND–0.89915EPA MCLBelow limit
Gross beta (about this substance)2.6 pCi/LRange 0.524–2.650EPA MCLBelow limit
Nickel (about this substance)0.004 mg/LRange 0.001–0.0040.1EPA MCLBelow limit
Copper (about this substance)0.009 mg/LRange ND–0.0091.3EPA action levelBelow limit
Barium (about this substance)0.005 mg/LRange ND–0.0052EPA MCLBelow limit
Uranium (about this substance)0.037 µg/LRange ND–0.03730EPA MCLBelow limit
Calcium (about this substance)7.8 mg/LRange 2.4–7.8No regulatory limit—
Magnesium (about this substance)2.9 mg/LRange 0.95–2.9No regulatory limit—
Sodium (about this substance)13.6 mg/LRange 7.1–13.6No regulatory limit—
Zinc (about this substance)0.025 mg/LRange ND–0.025No regulatory limit—
Field Temperature (about this substance)15.9 deg CRange 12.9–15.9No regulatory limit—
Alkalinity (about this substance)3.7 mg/LRange ND–3.7No regulatory limit—
Corrosivity (LSI) (about this substance)-1.07 n/aRange -5.61–-1.07No regulatory limit—
Total Dissolved Solids (about this substance)87.0 mg/LRange 25.0–87.0No regulatory limit—
Lead & copper
Lead (about this substance)ND µg/L(90th percentile)Range ND–1.115EPA action levelTrace — detected in some samples
Copper (about this substance)0.035 mg/L(90th percentile)Range 0.004–0.0481.3EPA action levelBelow limit
Disinfection byproducts
Chloroform (about this substance)2.0 µg/LRange ND–2.050EPA MCLBelow limit
Total Trihalomethanes (about this substance)2.0 µg/LRange ND–2.080EPA MCLBelow limit
Chlorate (about this substance)12.7 µg/LRange ND–12.7No regulatory limit—

Water characteristics

Water characteristics reported in Plainedge, Nassau County drinking water.
SubstanceDetected levelLimitStatus
Free Chlorine (about this substance)0.91 mg/LRange 0.59–0.914.0EPA MRDLBelow limit
pH (about this substance)8.3 UnitsRange 8.0–8.3No regulatory limit—
Hardness (total) (about this substance)31.5 mg/LRange 9.9–31.5No regulatory limit—
Calcium hardness (about this substance)19.6 mg/LRange 6.0–19.6No regulatory limit—

Status reflects the average of all samples. Individual readings may be higher; see range.

Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. Bethpage Water District's report does not name Plainedge in its service area. The service-area boundary the NYS Department of Health supplies to EPA places most of Plainedge inside the district (https://www.epa.gov/ground-water-and-drinking-water/community-water-system-service-area-boundaries (opens in a new tab)). That mapping is not in the report. The report carries 1 notice: No violations reported: 'the District's supply water is in full compliance with all Federal, State and County regulations and that no violations exist' (page 1). All table rows with a printed Violation cell show 'No'. 100% of Plainedge's land lies inside a public water service area (Bethpage Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

Your water district

Who supplies Plainedge’s water

Check your water bill to confirm your district. More than one utility serves this town — the name on your bill is the one that matches your service.

EPA compliance

Federal violation record for Plainedge’s suppliers

The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.

Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.

What the numbers mean

Like most of Nassau, Plainedge runs on treated public water. The day-to-day concerns here are the chlorine and chloramine used to keep the supply safe through the distribution system, plus the naturally high hardness of Long Island groundwater — the mineral content that leaves scale on fixtures and spots on glassware. Neither is an emergency, but both are exactly what point-of-entry carbon filtration and softening are designed to address.

What this means for filtration

Matching Plainedge’s water to a system

For Plainedge, the numbers point first to under-sink reverse osmosis and whole-house carbon filtration: dissolved contaminants close to their limits.

  • Recommended

    Under-Sink Reverse Osmosis

    Dissolved contaminants close to their limits

    Nitrate averaged 6.6 mg/L with samples up to 6.6 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. Perchlorate was detected up to 8.8 µg/L (limit 18).

    Explore Under-Sink Reverse Osmosis
  • Recommended

    Whole-House Carbon Filtration

    Chlorine residual 0.91 mg/L

    Free chlorine averaged 0.91 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 2 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.

    Explore Whole-House Carbon Filtration
  • Not needed here

    Whole-House + Softener Combo

    Hardness 31.5 mg/L, about 1.8 grains per gallon

    At 31.5 mg/L (1.8 gpg) the water is soft. A softener is not needed.

    Explore Whole-House + Softener Combo

Questions

Plainedge water FAQ

Free in-home test

See what’s really in your Plainedge water.

Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.