Skip to content
Fieldstone Water Co.

Suffolk County · Public water (SCWA — Distribution Area 14)

Water Quality in Belle Terre, NY — What’s In Your Water

Belle Terre's water is supplied by the Suffolk County Water Authority (SCWA) — Distribution Area 14. The most recent published results show Bromodichloromethane at 0.26 µg/L, Chlorate at 0.06 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.

Reported contaminants

Belle Terre water, by the numbers

Data: SCWA 2026 Drinking Water Quality Report (2025 data) · Verified 2026-09-14

These are the results for the whole SCWA distribution area. See every community in Area 14

ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.

Source: Suffolk County Water Authority 2026 Drinking Water Quality Report (2025 data) (opens in a new tab)

Contaminants reported in Belle Terre, Suffolk County drinking water, with detected level, regulatory limit, and status.
SubstanceDetected levelLimitStatus
PFAS
PFHxS (about this substance)ND ng/LRange ND–250000NYS MCL (unspecified organic contaminant)Trace — detected in some samples
Tested for and not detected (10): PFOS (about this substance), PFOA (about this substance), 6:2 FTS (about this substance), PFBS (about this substance), PFBA (about this substance), PFHpA (about this substance), PFHxA (about this substance), PFNA (about this substance), PFPeS (about this substance), PFPeA (about this substance)
Industrial solvents & 1,4-dioxane
1,4-Dioxane (about this substance)0.13 µg/LRange ND–0.441NYS MCLBelow limit
1,1,1-Trichloroethane (about this substance)ND µg/LRange ND–0.295NYS MCL (principal organic contaminant)Trace — detected in some samples
1,1-Dichloroethene (about this substance)ND µg/LRange ND–0.285NYS MCL (principal organic contaminant)Trace — detected in some samples
cis-1,2-Dichloroethene (about this substance)ND µg/L5NYS MCL (principal organic contaminant)Not detected
Tetrachloroethene (PCE) (about this substance)ND µg/L5NYS MCL (principal organic contaminant)Not detected
Trichloroethene (TCE) (about this substance)ND µg/L5NYS MCL (principal organic contaminant)Not detected
Nitrate, metals & inorganics
Color (about this substance)ND Color UnitsRange ND–515NYS secondary standardTrace — detected in some samples
Turbidity (about this substance)ND NTURange ND–0.995EPA MCLTrace — detected in some samples
Iron (about this substance)ND µg/LRange ND–42300NYS secondary standardTrace — detected in some samples
Nitrate (about this substance)1.01 mg/LRange 0.04–3.7910EPA MCLBelow limit
1,1-Dichlorethane (about this substance)ND µg/LRange ND–0.315NYS MCL (principal organic contaminant)Trace — detected in some samples
1,1,2-Trichlorotrifluoroethane (about this substance)ND µg/LRange ND–0.285NYS MCL (principal organic contaminant)Trace — detected in some samples
Copper (about this substance)ND mg/LRange ND–0.041.3EPA action levelTrace — detected in some samples
Chloride (about this substance)7.5 mg/LRange 4.6–15.5250NYS secondary standardBelow limit
Sulfate (about this substance)ND mg/LRange ND–6.8250NYS secondary standardTrace — detected in some samples
Perchlorate (about this substance)0.43 µg/LRange ND–1.5918NYS MCLBelow limit
Chromium (total) (about this substance)ND µg/LRange ND–0.9100EPA MCLTrace — detected in some samples
Hexavalent Chromium (about this substance)0.44 µg/LRange 0.15–0.97100EPA MCLBelow limit
Acesulfame-K (about this substance)ND µg/LRange ND–0.1950NYS MCL (unspecified organic contaminant)Trace — detected in some samples
Sucralose (about this substance)ND µg/LRange ND–0.0750NYS MCL (unspecified organic contaminant)Trace — detected in some samples
Alkalinity (about this substance)23.3 mg/LRange ND–43.0No regulatory limit—
Aluminum (about this substance)ND mg/LRange ND–0.02No regulatory limitTrace — detected in some samples
Calcium (about this substance)8.3 mg/LRange 4.1–16.4No regulatory limit—
CO2, calculated (about this substance)4.9 mg/LRange 0.9–11.5No regulatory limit—
Hardness (total) (about this substance)26.6 mg/LRange 12.9–54.2No regulatory limit—
Magnesium (about this substance)1.43 mg/LRange 0.66–3.53No regulatory limit—
Nickel (about this substance)ND µg/LRange ND–0.7No regulatory limitTrace — detected in some samples
pH (about this substance)7.1 pH UnitsRange 6.5–7.8No regulatory limit—
pH, field (about this substance)7.3 pH UnitsRange 6.5–7.9No regulatory limit—
Potassium (about this substance)0.49 mg/LRange 0.34–0.85No regulatory limit—
Silicon (about this substance)5.2 mg/LRange 4.1–6.9No regulatory limit—
Sodium (about this substance)5.8 mg/LRange 3.8–10.4No regulatory limit—
Specific conductance (about this substance)86 umho/cmRange 50–175No regulatory limit—
Strontium (about this substance)0.015 mg/LRange ND–0.044No regulatory limit—
Tested for and not detected (55): Carbamazepine (about this substance), Dilantin (about this substance), 5-(4-Hydroxyphenyl)-5-Phenylhydantoin (about this substance), Ibuprofen (about this substance), Imidacloprid (about this substance), Lamotrigine (about this substance), Meprobamate (about this substance), Phenobarbital (about this substance), Primidone (about this substance), Saccharin (about this substance), Stevioside (about this substance), Ammonia (as N) (about this substance), Arsenic (about this substance), Barium (about this substance), Boron (about this substance), Bromide (about this substance), Cobalt (about this substance), Fluoride (about this substance), Lithium (about this substance), Manganese (about this substance), Molybdenum (about this substance), Nitrite (about this substance), Phosphate, total (about this substance), Titanium (about this substance), Total Organic Carbon (TOC) (about this substance), Uranium (about this substance), Vanadium (about this substance), Zinc (about this substance), Alachlor ESA (about this substance), Alachlor OA (about this substance), Chlordane (about this substance), Diethyltoluamide (DEET) (about this substance), Metalaxyl (about this substance), Metolachlor (about this substance), Metolachlor OA (about this substance), Tetrachloroterephthalic Acid (about this substance), Chlorobenzene (about this substance), Chlorodifluoromethane (about this substance), Chloromethane (about this substance), Dichlorodifluoromethane (about this substance), 1,2-Dichloropropane (about this substance), Ethyl Benzene (about this substance), Methylene Chloride (about this substance), MTBE (about this substance), o-Xylene (about this substance), p,m-Xylene (about this substance), Tetrahydrofuran (about this substance), 1,2,4-Trichlorobenzene (about this substance), Trichlorofluoromethane (about this substance), 1,2,3-Trichloropropane (about this substance), Gross alpha (about this substance), Gross beta (about this substance), Radon-222 (about this substance), Radium-226 (about this substance), Radium-228 (about this substance)
Lead & copper
Copper (tap samples) (about this substance)0.377 mg/L(90th percentile)Range 0.022–0.6201.3EPA action levelBelow limit
Lead (about this substance)1.25 µg/L(90th percentile)Range ND–6.4715EPA action levelBelow limit
Disinfection byproducts
Free Chlorine (about this substance)0.97 mg/LRange 0.39–1.494EPA MRDLBelow limit
Dichloroacetic Acid (about this substance)ND µg/LRange ND–5.7660EPA MCLTrace — detected in some samples
Bromochloroacetic Acid (about this substance)ND µg/LRange ND–1.7250EPA MCLTrace — detected in some samples
Trichloroacetic Acid (about this substance)ND µg/LRange ND–1.2860EPA MCLTrace — detected in some samples
Dibromochloromethane (about this substance)ND µg/LRange ND–0.8180EPA MCLTrace — detected in some samples
Dibromoacetic Acid (about this substance)ND µg/LRange ND–0.4960EPA MCLTrace — detected in some samples
Chloroform (about this substance)0.37 µg/LRange ND–1.3280EPA MCLBelow limit
Bromoform (about this substance)ND µg/LRange ND–0.3280EPA MCLTrace — detected in some samples
Bromodichloromethane (about this substance)0.26 µg/LRange ND–1.0080EPA MCLBelow limit
Chlorate (about this substance)0.06 mg/LRange 0.03–0.10No regulatory limit—
Bromodichloroacetic Acid (about this substance)ND µg/L50EPA MCLNot detected
Monochloroacetic Acid (about this substance)ND µg/L60EPA MCLNot detected

Water characteristics

Water characteristics reported in Belle Terre, Suffolk County drinking water.
SubstanceDetected levelLimitStatus
Sodium Cyclamate (about this substance)ND µg/L50NYS MCL (unspecified organic contaminant)Not detected

Status reflects the average of all samples. Individual readings may be higher; see range.

Values are ranges/averages across all wells feeding each distribution area at the entry point. A home near an area boundary may receive water from the adjacent area. Area assignment is read from SCWA's distribution-area map. Confirm your address with SCWA's See My Water Quality lookup (https://www.scwa.com/mywaterquality/ (opens in a new tab)). 100% of Belle Terre's land lies inside a public water service area (Suffolk County Water Authority), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

Your water district

Who supplies Belle Terre’s water

EPA compliance

Federal violation record for Belle Terre’s suppliers

The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.

Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.

What the numbers mean

Belle Terre is served largely by SCWA, with private wells mixed in toward its edges. Western and central Suffolk carry Long Island's signature groundwater story — trace 1,4-dioxane and PFAS from historic land use, plus nitrate loading from lawns and septic systems. SCWA treats for these at its wellfields, but a point-of-entry system gives you a second barrier and covers any private-well portion of the neighborhood.

What this means for filtration

Matching Belle Terre’s water to a system

For Belle Terre, the numbers point first to whole-house carbon filtration: solvent traces and chlorine in the supply.

  • Recommended

    Whole-House Carbon Filtration

    Solvent traces and chlorine in the supply

    Free chlorine averaged 0.97 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 1.32 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk. Solvent traces were detected: 1,1,1-Trichloroethane up to 0.29 µg/L (limit 5 each). Whether a whole-house carbon model reduces those solvents is on that model's data sheet.

    Explore Whole-House Carbon Filtration
  • Worth considering

    Under-Sink Reverse Osmosis

    Drinking-water polish

    Perchlorate was detected up to 1.59 µg/L (limit 18). The supplier's 90th-percentile lead result was 0.00125 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.

    Explore Under-Sink Reverse Osmosis
  • Not needed here

    Whole-House + Softener Combo

    Hardness 26.6 mg/L, about 1.6 grains per gallon

    At 26.6 mg/L (1.6 gpg) the water is soft. A softener is not needed.

    Explore Whole-House + Softener Combo

Questions

Belle Terre water FAQ

Free in-home test

See what’s really in your Belle Terre water.

Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.