Skip to content
Fieldstone Water Co.

Suffolk County · Public water (St. James Water District (SCWA-supplied))

Water Quality in St. James, NY — What’s In Your Water

St. James's water is supplied by St. James Water District (SCWA-supplied). The most recent published results show Lead at ND ug/L, Copper at 0.33 mg/L. Every figure below is shown against its NY or EPA limit and cited to its source.

Reported contaminants

St. James water, by the numbers

Data from St. James Water District 2025 Water Quality Report · Verified 2026-09-14

ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.

Source: St. James Water District 2025 Drinking Water Quality Report (opens in a new tab)

Contaminants reported in St. James, Suffolk County drinking water, with detected level, regulatory limit, and status.
SubstanceDetected levelLimitStatus
Nitrate, metals & inorganics
Nitrate (about this substance)0.3–5.5 mg/Lrange; no average published10EPA MCLBelow limit
Odor (about this substance)1.0–1.0 range; no average published3NYS MCLBelow limit
Chloride (about this substance)8.7–51.4 mg/Lrange; no average published250NYS secondary standardBelow limit
Cyanide (about this substance)ND–16.4 ug/Lrange; no average published200EPA MCLBelow limit
Barium (about this substance)0.002–0.021 mg/Lrange; no average published2EPA MCLBelow limit
Manganese (about this substance)ND–0.055 ug/Lrange; no average published300NYS secondary standardBelow limit
Lead & copper
Copper (about this substance)0.33 mg/L(90th percentile)1.3EPA action levelBelow limit
Lead (about this substance)ND ug/L(90th percentile)15EPA action levelBelow limit
Disinfection byproducts
Total Trihalomethanes (about this substance)0.56–3.2 ug/Lrange; no average published80EPA MCLBelow limit
Chloroform (about this substance)0.56–1.3 ug/Lrange; no average published80 (TTHM sum)EPA MCLBelow limit
Bromodichloromethane (about this substance)ND–1.3 ug/Lrange; no average published80 (TTHM sum)EPA MCLBelow limit
Dibromochloromethane (about this substance)ND–0.69 ug/Lrange; no average published80 (TTHM sum)EPA MCLBelow limit
Chlorate (about this substance)85.7–90.7 ug/Lrange; no average publishedNo regulatory limit—

Water characteristics

Water characteristics reported in St. James, Suffolk County drinking water.
SubstanceDetected levelLimitStatus
Free Chlorine (about this substance)0.43–1.48 mg/Lrange; no average published4EPA MRDLBelow limit
Hardness (total) (about this substance)68.4–120.0 mg/Lrange; no average publishedNo regulatory limit—
Calcium Hardness (about this substance)46.4–72.7 mg/Lrange; no average publishedNo regulatory limit—
Specific Conductance (about this substance)181–419 umhos/cmrange; no average publishedNo regulatory limit—
Sodium (about this substance)9.4–32.3 mg/Lrange; no average publishedNo regulatory limit—
pH (about this substance)6.94–7.52 Unitsrange; no average publishedNo regulatory limit—

Where the report prints only a range, status reflects the high end of that range; where it prints an average, status reflects the average.

From the district's report: it publishes ranges only, sampled in the distribution system; PFAS, 1,4-dioxane and VOC testing is done by SCWA at the source wells and is not in this report. The report notes nitrate above 5 mg/L but below the 10 mg/L limit and includes the infant advisory. 100% of St. James's land lies inside a public water service area (St. James Water District and others), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.

Your water district

Who supplies St. James’s water

Check your water bill to confirm your district. More than one utility serves this town — the name on your bill is the one that matches your service.

EPA compliance

Federal violation record for St. James’s suppliers

The annual report above lists what was found in the water. EPA’s compliance database records whether each supplier met its testing, treatment, and reporting obligations.

Compliance counts are EPA Safe Drinking Water Information System records pulled directly from EPA. Most violations are monitoring or reporting lapses, not unsafe water; health-based violations (a contaminant limit, disinfectant level, or treatment technique) are counted separately. A system listed for a ZIP code may serve only part of it.

What the numbers mean

St. James is served largely by SCWA, with private wells mixed in toward its edges. Western and central Suffolk carry Long Island's signature groundwater story — trace 1,4-dioxane and PFAS from historic land use, plus nitrate loading from lawns and septic systems. SCWA treats for these at its wellfields, but a point-of-entry system gives you a second barrier and covers any private-well portion of the neighborhood.

What this means for filtration

Matching St. James’s water to a system

For St. James, the numbers point first to under-sink reverse osmosis, whole-house carbon filtration, and whole-house + softener combo: dissolved contaminants close to their limits.

  • Recommended

    Under-Sink Reverse Osmosis

    Dissolved contaminants close to their limits

    Nitrate averaged 5.5 mg/L with samples up to 5.5 against a 10 mg/L limit — the closest number to its limit here. It passes straight through carbon; reverse osmosis is designed to reduce it at the tap. Sodium averaged 32.3 mg/L, above the 20 mg/L level New York flags for sodium-restricted diets.

    Explore Under-Sink Reverse Osmosis
  • Recommended

    Whole-House Carbon Filtration

    Chlorine residual 1.48 mg/L

    Free chlorine averaged 1.48 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair. Chlorination by-products (trihalomethanes) reached 1.3 µg/L in some samples against an 80 µg/L limit for the group; they are absorbed in the shower as well as drunk.

    Explore Whole-House Carbon Filtration
  • Recommended

    Whole-House + Softener Combo

    Hardness 120 mg/L, about 7.0 grains per gallon

    At 120 mg/L (7.0 gpg) this is hard water: it scales water heaters, spots glassware and leaves film on skin. A softener paired with carbon is the standard fix above 7 grains.

    Explore Whole-House + Softener Combo

Questions

St. James water FAQ

Free in-home test

See what’s really in your St. James water.

Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.