Nassau County · Public water (Lido-Point Lookout Water District (report pre…)
Water Quality in Point Lookout, NY — What’s In Your Water
Point Lookout's water is supplied by Lido-Point Lookout Water District (report prepared by the Town of Hempstead Department of Water). The most recent published results show Copper at 0.079 mg/L, Lead at 1.4 µg/L. Every figure below is shown against its NY or EPA limit and cited to its source.
Reported contaminants
Point Lookout water, by the numbers
ND means not detected. Units: µg/L is micrograms per liter (parts per billion); ng/L is nanograms per liter (parts per trillion); mg/L is milligrams per liter (parts per million). Status uses the words below, near, exceeds, or trace — not color alone.
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| Nitrate, metals & inorganics | |||
| Iron (about this substance) | ND–170 µg/Lrange; no average published | 300NYS secondary standard | Below limit |
| Odor (about this substance) | ND–1 Unitsrange; no average published | 3NYS secondary standard | Below limit |
| Combined Radium 226/228 (about this substance) | ND–1.23 pCi/Lrange; no average publishedReport footnote: Results are from raw source water. | 5EPA MCL | Raw source water, before treatment |
| Gross alpha (about this substance) | ND–2.81 pCi/Lrange; no average publishedReport footnote: Results are from raw source water. | 15EPA MCL | Raw source water, before treatment |
| Beryllium (about this substance) | ND–0.46 µg/Lrange; no average published | 4EPA MCL | Below limit |
| Uranium (about this substance) | ND–2.81 µg/Lrange; no average published | 30EPA MCL | Below limit |
| Gross beta (about this substance) | ND–4.68 pCi/Lrange; no average publishedReport footnote: Results are from raw source water. | 50EPA MCL | Raw source water, before treatment |
| Sulfate (about this substance) | 14.7–15.9 mg/Lrange; no average published | 250NYS secondary standard | Below limit |
| Chloride (about this substance) | 6.4–7.4 mg/Lrange; no average published | 250NYS secondary standard | Below limit |
| Barium (about this substance) | 0.018–0.019 mg/Lrange; no average published | 2.0EPA MCL | Below limit |
| Nickel (about this substance) | 0.0022–0.0024 mg/Lrange; no average published | No regulatory limit | — |
| Magnesium (about this substance) | 0.77–0.82 mg/Lrange; no average published | No regulatory limit | — |
| Sodium (about this substance) | 8.2–9.0 mg/Lrange; no average published | No regulatory limit | — |
| Corrosivity (LSI) (about this substance) | -0.47–-0.53 mg/Lrange; no average published | No regulatory limit | — |
| Alkalinity (about this substance) | 39.8–41.9 mg/Lrange; no average published | No regulatory limit | — |
| Hardness (total) (about this substance) | 41.1–43.8 mg/Lrange; no average published | No regulatory limit | — |
| Calcium hardness (about this substance) | 38.0–40.5 mg/Lrange; no average published | No regulatory limit | — |
| pH (about this substance) | 7.59–8.58 Unitsrange; no average published | No regulatory limit | — |
| Total Dissolved Solids (about this substance) | 53–74 mg/Lrange; no average published | No regulatory limit | — |
| Lead & copper | |||
| Lead (about this substance) | 1.4 µg/L(90th percentile)Range ND–2.5 | 15EPA action level | Below limit |
| Copper (about this substance) | 0.079 mg/L(90th percentile)Range ND–0.081 | 1.3EPA action level | Below limit |
Water characteristics
| Substance | Detected level | Limit | Status |
|---|---|---|---|
| Free Chlorine (about this substance) | 0.43–1.16 mg/Lrange; no average published | 4.0EPA MRDL | Below limit |
Where the report prints only a range, status reflects the high end of that range; where it prints an average, status reflects the average.
Where the report prints both an average and a range, the status column here is judged on the average; where it prints a maximum or a 90th-percentile result, that figure is used. The report carries 1 notice: No violation notice printed. DISTRICT DATA prints VIOLATION OF STANDARDS 0. 100% of Point Lookout's land lies inside a public water service area (Lido-Point Lookout Water District), per the NYS Department of Health boundaries EPA publishes. A service area is where mains run; a home inside it can still be on a private well.
Your water district
Who supplies Point Lookout’s water
Lido-Point Lookout Water District (report prepared by the Town of Hempstead Department of Water)
What the numbers mean
Like most of Nassau, Point Lookout runs on treated public water. The day-to-day concerns here are the chlorine and chloramine used to keep the supply safe through the distribution system, plus the naturally high hardness of Long Island groundwater — the mineral content that leaves scale on fixtures and spots on glassware. Neither is an emergency, but both are exactly what point-of-entry carbon filtration and softening are designed to address.
What this means for filtration
Matching Point Lookout’s water to a system
For Point Lookout, the numbers point first to whole-house carbon filtration: chlorine residual 1.16 mg/L.
- Recommended
Whole-House Carbon Filtration
Chlorine residual 1.16 mg/L
Free chlorine averaged 1.16 mg/L at the entry point (limit 4), the residual that gives tap water its pool taste and dries skin and hair.
Explore Whole-House Carbon Filtration - Worth considering
Under-Sink Reverse Osmosis
Drinking-water polish
The supplier's 90th-percentile lead result was 0.0014 mg/L (1 ppb) against the 15 ppb action level. Lead enters water from a home's own service line and fixtures, so the system figure says little about any one house; a filter certified for lead (NSF/ANSI 53) or reverse osmosis at the kitchen tap reduces it at the point you drink.
Explore Under-Sink Reverse Osmosis - Not needed here
Whole-House + Softener Combo
Hardness 43.8 mg/L, about 2.6 grains per gallon
At 43.8 mg/L (2.6 gpg) the water is soft. A softener is not needed.
Explore Whole-House + Softener Combo
Questions
Point Lookout water FAQ
Nearby Nassau County towns
Free in-home test
See what’s really in your Point Lookout water.
Published reports cover the public supply — a free in-home test measures your taps (and your well, if you have one), then we walk you through the results.